- News
18 September 2017
SFP-DD MSA releases spec for high-speed, high-density interface
The Small Form Factor Pluggable Double Density (SFP-DD) Multi Source Agreement (MSA) Group has completed the initial hardware specification and drawings for the SFP-DD pluggable interface designed to enable high-speed, high-density networking equipment.
Targeting support up to 3.5W optical modules in an enterprise environment, the SFP-DD form factor addresses the technical challenges of achieving a double-density interface and ensuring mechanical interoperability for module components produced by different manufacturers.
SFP-DD MSA founding members include Alibaba, Broadcom, Brocade, Cisco, Dell EMC, Finisar, Hewlett Packard Enterprise, Huawei, Intel, Juniper Networks, Lumentum, Mellanox Technologies, Molex, and TE Connectivity.
The SFP-DD electrical interface expands on the existing SFP pluggable form factor, a widely adopted interface used in data centers and other networking platforms. The SFP single-lane interface operates up to 28Gbps NRZ (non-return-to-zero) or 56Gbps PAM-4 (4-level pulse amplitude modulation). The new SFP-DD electrical interface is designed to support two lanes that operate up to 28Gbps NRZ or 56Gbps PAM-4 per lane, providing aggregate bandwidth of 56Gbps or 112Gbps.
By doubling the lane density and data speed, the SFP-DD interface will help to address demand for increased port density and scalability in next-generation applications, with a primary focus on the server-side interconnect. An SFP-DD server port along with QSFP-DD switch ports provides an overall doubling of the port density in network applications.
The SFP-DD hardware specification and drawings define key module, plug and cage characteristics. SFP-DD modules and direct-attach cable (DAC) plugs use a common mechanical outline. Modules and plugs provide a means to self-lock with the cage upon insertion. Network equipment based on the SFP-DD will support legacy SFP modules and cables, and new double-density products, for optimal design flexibility.
Key SFP-DD features are listed as: a single-port SMT connector and cage; heat-sink options for thermal management flexibility; module mechanical definition; and support for optical and copper interfaces, with physical layer specifications to be determined outside the scope of the SFP-DD MSA.
©2006-2020
Juno Publishing and Media Solutions Ltd. All rights reserved. Semiconductor
Today and the editorial material contained within it and related media is
the copyright of Juno Publishing and Media Solutions Ltd. Reproduction in
whole or part without permission from Juno Publishing and Media Solutions
Ltd is forbidden. In most cases, permission will be granted, if the magazine
and publisher are acknowledged.