18 August 2016

Hexagonal boron nitride enables cost-effective, compact solid-state detection of neutron signals

A group of Texas Tech University researchers led by professors Hongxing Jiang and Jingyu Lin has developed hexagonal boron nitride semiconductor as a possible low-cost alternative to helium gas detectors in neutron detection ('Realization of highly efficient hexagonal boron nitride neutron detectors' by A. Maity, T.C. Doan, J. Li, J.Y. Lin and H.X. Jiang, Appl. Phys. Lett. 109, 072101 (2016)).

To prevent terrorists from smuggling nuclear weapons into its ports, the US Security and Accountability for Every Port Act mandates that all overseas cargo containers be scanned for possible nuclear materials or weapons by using detectors containing helium-3 gas, as detecting neutron signals is an effective method to identify nuclear weapons and special nuclear materials. However, while helium-3 gas works well for neutron detection, it is extremely rare on Earth. Demand for helium-3 gas detectors has nearly depleted the supply, most of which was generated during the period of nuclear weapons production over the past 50 years. It is not easy to reproduce, and the scarcity of helium-3 gas has caused its cost to rise recently, making it impossible to deploy enough neutron detectors to fulfill the requirement to scan all incoming overseas cargo containers. Helium-4 is a more abundant form of helium gas, which is much less expensive, but it cannot be used for neutron detection because it does not interact with neutrons.

The Texas Tech group's alternative concept was first proposed to the US Department of Homeland Security's Domestic Nuclear Detection Office and received funding from its Academic Research Initiative program six years ago.

By using a 43μm-thick hexagonal boron-10 enriched nitride layer (h-10BN), the group created a thermal neutron detector with 51.4% detection efficiency, which is a record for semiconductor thermal neutron detectors. "Higher detection efficiency is anticipated by further increasing the material thickness and improving materials quality," says professor Jiang of the Nanophotonics Center and Electrical & Computer Engineering at Texas Tech's Whitacre College of Engineering.

"Our approach of using hexagonal boron nitride semiconductors for neutron detection centers on the fact that its boron-10 isotope has a very large interaction probability with thermal neutrons," Jiang says. "This makes it possible to create high-efficiency neutron detectors with relatively thin hexagonal boron nitride layers. And the very large energy bandgap of this semiconductor (6.5eV) gives these detectors inherently low leakage current densities," he adds.

"Compared to helium gas detectors, boron nitride technology improves the performance of neutron detectors in terms of efficiency, sensitivity, ruggedness, versatile form factor, compactness, lightweight, no pressurization… and it's inexpensive," Jiang continues. "Beyond special nuclear materials and weapons detection, solid-state neutron detectors also have medical, health, military, environment and industrial applications," he adds. "The material also has applications in deep-ultraviolet photonics and two-dimensional heterostructures. With the successful demonstration of high-efficiency neutron detectors, we expect it to perform well for other future applications."

The main innovation behind this new type of neutron detector was developing hexagonal boron nitride with epitaxial layers of sufficient thickness - which previously did not exist, say the researchers. "It took our group six years to find ways to produce this new material with a sufficient thickness and crystalline quality for neutron detection," Jiang notes. Based on their experience working with III-nitride wide-bandgap semiconductors, the group knew at the outset that producing a material with high crystalline quality would be difficult. "It's surprising to us that the detector performs so well, despite the fact that there is still a little room for improvement in terms of material quality," he said.

One of the most important impacts of the group's work is that "this new material and its potential should begin to be recognized by the semiconductor materials and radiation detection communities," Jiang believes.

Now that the group has solved the problem of producing hexagonal boron nitride with sufficient thickness, as well as crystalline quality, to enable the demonstration of neutron detectors with high efficiency, the next step is to demonstrate high sensitivity of large-size detectors. "These devices must be capable of detecting nuclear weapons from distances tens of meters away, which requires large-size detectors," Jiang says. "There are technical challenges to overcome, but we're working toward this goal."

Tags: Boron nitride

Visit: http://scitation.aip.org/content/aip/journal/apl/109/7/10.1063/1.4960522

Visit: www2.ece.ttu.edu/nanophotonics