23 February 2012

Fujitsu launches multimode, multiband transceiver IC for 2G/3G/4G mobile products

Fujitsu Semiconductor Wireless Products Inc (FSWP) of Tempe, AZ, USA - a subsidiary of Japan’s Fujitsu Semiconductor Ltd (FSL) that provides RF transceivers for mobile cellular handsets and other portable wireless devices - has introduced the MB86L11A, the firm’s next-generation, single-chip 2G/3G/4G transceiver. The multiband, multimode device supports all modes, including LTE (FDD and TDD), HSPA+, WCDMA, GSM, EDGE, EDGE-EVO, CDMA, and TD-SCDMA. Sampling will begin in second-quarter 2012.

“Fujitsu’s transceivers solve major challenges for wireless device manufacturers planning to introduce both regional and global devices with roaming capabilities in almost any combination of bands and modes,” says FSWP vice president Vivek Bhan. “The new device augments Fujitsu’s growing family of state-of-the-art multimode, multiband single-chip transceivers, which are available in production quantities [with millions of transceivers shipped to date],” he adds.

Fujitsu began shipping the industry’s first SAW-less transceiver for 2G/3G networks, the MB86L01A, in 2009. In 2010, it launched the MB86L10A, the first 3G and LTE SAW-less transceiver, which has been integrated into dongles, tablets and multimode 2G/3G/4G smartphones. The MB86L12A, the third production-ready Fujitsu 2G/3G/4G SAW-less transceiver, conforms to the upgraded MIPI DigRF standard. The MB86Lxxx family transceivers are deployed by multiple baseband providers worldwide, with millions of units shipped to date. Fujitsu says the addition of the next-generation 2G/3G/4G MB86L11A enhances its family of transceivers with the compact design and latest advanced features required by device manufacturers.

FSWP says that the new MB86L11A 2G/3G/4G multimode, multiband transceiver supports benchmark performance for current drain and RF parameters, with a smaller package incorporating features including enhanced power control, envelope tracking (ET) and antenna tuning (AT). Envelope tracking technology helps to significantly lower the radio system power consumption, while improving transmitter efficiency. Antenna tuning optimizes the total radiated power output from the antenna. Both features optimize the battery life of mobile devices.

An advanced programming interface (API) feature minimizes factory calibration time, provides flexible port mapping and adds customized key performance indicator (KPI) features. The MB86L11A is built using the surface acoustic wave (SAW)-less architecture pioneered by Fujitsu, which also eliminates the need for external low-noise amplifiers (LNAs).

Other features of the MB86L11A include eight RF outputs on the transmitter, nine primary RF inputs and six diversity RF inputs on the IC, giving greater flexibility to map ports and bands for different market requirements. The transceiver uses an open-standard MIPI DigRF interface to the baseband, and has both DigRF 4G and DigRF 3G interfaces to work with existing 2G/3G baseband platforms as well as with newer multimode 4G basebands.

The device supports all global FDD and TDD bands, including 1-21, 23-25, and 33-41. The MB86L11A, like earlier Fujitsu LTE multimode, multiband transceivers, supports 2G/3G/4G networks up to 20MHz bandwidth. Future transceivers on the roadmap include a 4G LTE optimized device and a 3GPP Release 10, carrier-aggregation-compliant, single RFIC solution.

“The Fujitsu MB86Lxxx family transceivers offer advanced features, low power consumption, a small footprint and a highly flexible API to bring down the total cost of the device and dramatically speed up time to market for new products,” says Bhan.

Tags: Fujitsu Transceiver

Visit: http://us.fujitsu.com/micro/rftransceiver